Miele CERAMIC COOKTOP WITH INDUCTION KM 5753 Operating And Installation Instructions page 36

Frequently asked questions
What if one of the following has occurred?
Possible fault
The booster has automatically switched
off early.
The power level has dropped.
The burner is not working as usual.
What if the cooling fan continues to run after the appliance has been
switched off?
This is not a fault. The fan will continue running until the appliance has cooled. It
will then switch itself off automatically.
What if an F appears in the display for the rear burners, an E appears in the
display for the front burners and numbers appear in the timer display
Possible fault
FE99
Other fault messages
36
Solution
The overheating protecting feature has
been triggered, see "Safety features".
Solution
The overheating protection mechanism
has triggered. The burner can be used
again as soon as it has cooled down to
a safe level.
Interrupt the power supply to the
cooktop for approx. 1 minute.
If the problem persists after
reconnecting the appliance to the
power supply, please contact the Miele
Technical Service department.