Placement Options; Mounting The Switch On A Rack; Placing The Switch On A Flat Surface - Asus GigaX 1124 Quick Installation Manual

Placement options

Placing the switch on a flat surface

Place the switch on a flat surface that can support the weight of the switch
and its accessories. Make sure the surface meets the operating
environment specifications.
NOTE. The length of the UTP Category 5 cable should not exceed 80
meters.

Mounting the switch on a rack

To mount the switch on a rack:
1. Locate the screw holes on each side of the switch.
2. Align a mounting bracket with the screw holes on one side of the switch.
3. Secure the mounting bracket using three screws.
4. Follow steps 2 and 3 to secure the other bracket.
5. Place the switch on a 19-inch rack, then secure it with two rack mount
screws.
NOTE. The rack mount screws are not included in your switch
package. Use the screws from the rack.
ASUS GigaX 1124 9