Advertisement
+DUG 5HVHW
In some cases, you may need to clear the memory (RAM) from your
Pocket PC with a hard reset. For example, you should clear the memory:
Ã
When your Pocket PC does not respond after a soft reset.
Ã
When you forget your password.
Clearing the memory means all data you have entered in RAM, including
all files, system settings and additional programs you have installed, will
be erased. You Pocket PC will restore to the factory default state.
computer before doing a hard reset. All your data is lost when you do a
hard reset.
Save your data to a memory card or to your
Backup your data if necessary.
Disconnect all cables from your Pocket PC.
Make sure that your Pocket PC is switched off.
Unscrew the cap of your stylus. Use the pointed end of the cap to slide
the hard reset switch to the OFF (up) position.
Wait for 1 minute and then slide the switch back to the ON position.
Your Pocket PC automatically turns on.
Tap the touch screen to start the calibration and activation.
,I <RX +DYH 3UREOHPV
Advertisement
