Mitsubishi Electric WD-52631 Owner's Manual page 19

TV Back Panel, continued
4. COMPONENT 1 and 2 Inputs
(Audio and Video)
Y Pb Pr (480i/480p/720p/1080i)
Use these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers, or
compatible video game systems. Please see Appendix B
for signal compatibility.
5. HDMI™ 1 and 2
Do not connect a computer to either HDMI jack.
The HDMI (High Definition Multimedia Interface) supports
uncompressed standard and high-definition digital video
formats and PCM digital audio format. For PC video, use
the PC-DVI input instead.
Use these inputs to connect to EIA/CEA-861 compliant
devices such as a high-definition receiver or DVD player.
These inputs support 480i, 480p, 720p, 1080i, and 1080p
video formats.
These inputs can also accept DVI video inputs. To connect
a DVI input, use an HDMI-to-DVI adapter or cable plus
analog audio cables. Connect the analog audio cables to
the HDMI/DVI AUDIO inputs on the TV to receive left
and right stereo audio from your DVI device.
These inputs are HDCP (High-Bandwidth Digital Copy Pro-
tection) compliant.
These inputs are
ability with other products certified by Simplay™.
6. HDMI/DVI AUDIO
Use these analog audio inputs when connecting DVI
video devices to the TV's HDMI jacks. Unlike HDMI,
DVI does not carry audio information on the same cable.
For analog audio from a personal computer, use the
PC-DVI AUDIO jacks instead.
7. PC-DVI
Do not connect a TV video source to the PC-DVI input.
PC-DVI is a DVI-I input compatible with both DVI-A
(analog) and DVI-D (digital) inputs. Connect your personal
computer's HDMI, DVI, or VGA video output to this jack.
An adapter or converter cable may be required. Please
see Appendix B for signal compatibility. To hear audio
from the computer, connect analog audio cables from the
computer to the PC-DVI AUDIO jacks.
certified for proper interoper-
Chapter 1. Television Overview
8. PC-DVI AUDIO
Use the PC-DVI AUDIO jacks in conjunction with the
PC-DVI video input from a personal computer. These
jacks allow you to send left and right analog audio from
your computer to the TV.
9. DTVLINK™/IEEE 1394
These jacks allow the TV to connect to external IEEE 1394
digital products by means of a single cable. See chapter 7,
"Using IEEE 1394 Devices" for detailed information regard-
ing IEEE 1394 connections and recording.
10. MONITOR OUT
Use these composite video and left/right audio jacks
to send analog video and audio signals to an external
recording device such as a VCR. The signals from these
jacks are from the program currently being viewed on the
TV screen. To make recordings from this output, the
TV must be in normal full-screen mode rather than in
mode.
• From this output you can record audio and video
signals from ANT 1, ANT 2, INPUT 1-3, and
IEEE 1394 devices.
Digital signals from ANT 1, ANT 2, and IEEE
•
1394 devices are converted to analog video and
audio signals.
• Some signals cannot be recorded because of
copy-protection flags in the content.
11. AUDIO OUT LEFT/RIGHT
AUDIO OUT LEFT/RIGHT jacks send analog audio of
the program currently shown on the screen to an A/V sur-
round sound receiver or stereo system. Digital audio from
digital channels, FireWire® (DTVLink/IEEE 1394) devices
and HDMI devices is converted to analog audio by the TV.
If using an analog A/V receiver or stereo system, this is
the only audio connection needed between it and the TV.
12. DIGITAL AUDIO OUT
This output sends Dolby Digital or PCM digital audio to your
digital A/V surround sound receiver. Analog audio from
analog channels and devices is converted by the TV to
PCM digital audio. If you have a digital A/V receiver, in most
cases this is the only audio connection needed between the
TV and your A/V receiver.
19