Split Screen - Mitsubishi Electric WD-52631 Owner's Manual

40
Chapter 3. TV Operation

Split Screen

Split Screen allows you to view pictures from two different
sources at the same time. Split Screen is available when
you have video sources connected to the TV in addition to
a connection to ANT 1 or ANT 2.
Operation
Split Screen Operations
Turn Split Screen on or off
Switch the sound source between main
and sub-pictures.
Check which picture is the sound source.
Change the source of the sub-picture.
Change channels (when the input source is
ANT 1 or ANT 2).
Freeze or unfreeze the sub-picture.
Change the size of the main and sub-
pictures.
Make the sub picture fill the screen.
"SPLIT" appears under the
Video icon to distinguish
this menu from the Input
Selection menu.
Figure 5. Change the source of the sub-picture with the
Split Screen Input Selection menu.
Instructions
Press SPLIT.
Press or . The speaker icon appears briefly to indicate the
sound source as either the main picture (left) or sub-picture
(right). The sound source is the side you can control with the
remote control.
Press INFO. The speaker icon appears in the status display to indicate the
sound source.
1. Press to make the sub-picture the sound source.
2. Press INPUT and move the highlight to the icon for the input you wish
to view as the sub-picture (see figure 5).
3. Press ENTER to make the change.
Grayed-out input icons are unavailable as Split Screen sources or with
the current source.
Press to make the sub-picture the sound source then press CH
Press (PAUSE). Press
Repeatedly press FORMAT to cycle through picture sizes. See the follow-
ing page for sample displays.
1. Press to make the sub-picture the sound source.
2. Press SPLIT to close Split Screen mode.
Choice of Split Screen
sub-Picture Sources
again to return to normal moving video.
IMPORTANT
Split Screen is unavailable if:
• Your only inputs are ANT 1 and ANT 2.
• Either picture source is a 1080p signal from
an HDMI jack.
• Either picture source is from a personal
computer.
/ .