Wall Outlet Cable (No Cable Box) - Mitsubishi Electric WD-52631 Owner's Manual

26
Chapter 2. TV Connections

Wall Outlet Cable (no cable box)

(can be used with a CableCARD™, models WD-57731
and 65731)
It is very important to connect the incoming cable for your
primary viewing source to ANT 1/MAIN, especially for
CableCARD™ use.
1. Connect the primary incoming coaxial lead cable to
ANT 1/MAIN on the TV back panel.
2. For an optional secondary antenna source, connect
an antenna (or cable) to ANT 2/AUX.
3. If you have subscribed to a CableCARD™ service,
Insert the CableCARD into the CableCARD slot. The
top of the card must face in the direction indicated by
the CARD TOP arrow.
See chapter 1, "Television Overview," for additional
CableCARD information.
Figure 6. Wall Outlet Cable