Mitsubishi Electric G-50A Instruction Book page 11

Collective operation switch
If this switch is pressed during
the operation, a whole group stop
is performed.
6 ADDRESS SETTING
7 FUNCTION SETTING
8 IP ADDRESS SETTING
BACK
2
LOSSNAY
The collective operation switch can be per-
formed in the user setting mode for any screen.
( Excluding menu screen )
LAN changeover switch
Refer to section "5. Initial setting ( page 25 ) " for
explanation of the operation of these switches.
LCD contrast adjustment knob
LAN status lamp
Orange LED indicates action and green LED indicates link.
Service LAN connector
Refer to section "5. Initial setting " for an explanation of this connector.
Rear side
Operation
panel
LAN(Ethernet)connector
6
7
8
VER. .
3
4
5
GROUP NO
NONE
INDICATE
INDICATE
1-1-2001
NONE
7 TEMP. UNIT ˚C / ˚F
M-NET
Ethernet
A B S
RS-232C connector
M-NET Transmission
line terminal
External input / output interface connecter
Refer to section "7. External input / out-
put function ( page 38 )" for the detail
of operation of these connectors.
DC power supply terminator
M-NET address setting Function select setting
ADDRESS SETTING FUNCTION SELECTS
M-NET ADDRESS: 000
OFF
Displays, or sets, the controller Sets the function of the controll-
M-NET address. er.Refer to section "5. Initial set-
Refer to section "5. Initial setting
ting(page 25)" for a detailed ex-
(page 25)" for a detailed explan-
planation of operation.
ation of operation.
-9-
POWER
1 CN1 5 1 9
RS232C CN2
12VDC GND
IP address setting
IP ADDRESS SETTING
1 2 3 4 5 6 7 8
IP ADDRESS :
ON
MASK ADDRESS:
Sets the LAN IP address.
Refer to section "5. Initial setti-
ng(page 25)" for a detailed ex-
planation of operation.
2002
16-04-2002 12 : 45
014 6602 (DETECT 014)
2002
05-04-2002 09 : 12
012 6607 (DETECT 012)
2002
a
that
Maintenance
192.168.001.001
255.255.255.000