Ip Address Setting; Initial Setting Tools Connection Function - Mitsubishi Electric G-50A Instruction Book

5-8 IP address setting

• This function allows setting of the IP address and mask address needed at LAN connection.
MENU
6 ADDRESS SETTING
7 FUNCTION SETTING
8 IP ADDRESS SETTING
BACK
IP ADDRESS SETTING
IP ADDRESS :
192.168.001.001
MASK ADDRESS :
255.255.255.000
5-9 Initial setting tool connection function
• This function connects the initial setting tool PC by LAN.
• Group setting, interlocked setting, and other information can be downloaded to this unit by using the initial setting tool
Refer to the initial setting tool manual for an explanation of the initial setting tool functions and operating procedures.
LAN changeover switch
FRONT
WED 15:29
1
The IP address setting screen appears.
2
3
4
ACT
LINK
Service LAN connector
REAR
Select the switch select "8. IP ADDRESS SETTING"
6
on the initial setting menu screen.
Move the cursor to the address setting position by pressing the
, , and
Set the address with the 0 to 9 numeric switches.
When all address setting are complete, return to the initial
setting menu screen by pressing
1 Remove the cover from the controller by inserting a flat blade
screwdriver into the gap between the cover and body and twi-
sting the screwdriver.
Use the dedicated cable (sold separately) to connect the initial
2
setting tool PC to the service LAN connector.
3 When changed to FRONT with the LAN changeover switch,
the initial setting tool PC is connected to the service LAN
connector.
When setting with the initial setting tool is complete, return the
4
LAN changeover switch to the REAR position.
*When a service LAN connector is used, the option Model
PAC-YG00FA-E is necessary.
-35-
keys.
BACK switch.
SCREEN