Mitsubishi Electric G-50A Instruction Book page 22

(1) Schedule pattern (P1
• Follow the procedures described below to set each daily schedule pattern for each group.
• The setting temperature or set-back values setting are also performed in the schedule setting operation. To enter
the setting temperature or set-back value setting select SET-BACK or SET TEMP. Accordance with section "5-7
user setting (page 34)" in advance.
• The setting temperature or set-back value selected in this way take effect only during timer operation.Also set-
back operation is cancelled if the setting temperature is changed using this central controller or a local remote
controller.
( The set-back operation resumes at the next timer-ON time )
<Schedule pattern setting( P1
Setting example in case of
P3) setting
P3, P4 ) >
1
Press the
setting.
2
Press the
the pattern ( P1 P3,
3
Press the
4
The schedule pattern setting screen is displayed.
Press the
5
the first ON (PROHIBITION) time.
Press the
6
time. (time is changed by 10 minutes unit.)
7 Press the
(The cursor moves to the next setting position.)
8
Perform operation
9
Perform operation
10 Repeat operation
HIBITION/PERMISSION) schedules in the same manner.
When the second or third ON/OFF (PROHIBITION/PERMISSION) sch-
edule is not used, the characters "
the switch one time.
ENTER
11
To cancel the ON/OFF (PROHIBITION/PERMISSION) time that was set
previously, use the
to the time position to be cancelled and press the
12
When the P1 setting are completed,perform operation
essary to perform the setting for P2 or P3 or
P4
-20-
GROUP switch to display the group in desired a timer
SELECT
switch to move the cursor position to
P4 ) to be setting.
ENTER switch one time.
switch to move the cursor position to
CLOCK / PATTERN
switch to select the ON (PROHIBITION)
/
5 8
ENTER switch one time to set ON (PROHIBITION) schedule.
to select OFF (PERMISSION) time.
6
7 to set the OFF (PERMISSION) time.
6 to to set the second and third ON/OFF (PRO-
9
:
" remain display and press
switch to move the cursor
RESET
switch.
DEL.
2 to as nec-
11
P4 .