Table of Contents
Advertisement
5.4.6.2
Siemens AG
ICM CP
Direct connection
The following parameters can be configured:
Parameter
Device properties
Port settings
Manual dial (user supplies dial strings) (not selected)
Use terminal window before dialing
Use terminal window after dialing
Baud rate
Data bits
Parity
Stop bits
Flow control
Call Options
Cancel the call if not connected within
... seconds
Wait for dial tone before dialing
Wait for credit card tone ... seconds
Extra settings (special modem
commands may be inserted into the
dial string)
TCP/IP settings
General
Use server-assigned IP address
IP address:
Use Slip
Use software compression
Use IP header compression
Name servers
Use server-assigned addresses
Primary DNS
Secondary DNS
Primary WINS
Secondary WINS
Dial-up connection
Country code
Area code
Telephone number
Force long distance
Force local
HomeRF Configuration
The following parameters of HomeRF terminal can be configured:
Parameter
PPPoE (direct connection):
Internet access
User-ID
Password
•
COM2 (not used)
•
COM3 (not used)
•
Generic IrDA modem
•
IR on SP2
•
COM2
•
Infrared Port
•
Serial cable on COM1
Technical Description
SIMpad SL4
Version V2.0
Default value
(not selected)
(not selected)
115200
8
none
1
none
selected, 120
selected
0
(none)
selected
(none)
(not selected)
selected
selected
selected
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(not selected)
(not selected)
Default value
(not selected)
(none)
(none)
20.08.01, David Brunner
42/74
Advertisement
Table of Contents
