5.4.6.3
Siemens AG
ICM CP
Connection set-up
Disconnection
Indicated parameters (only when PPPoE active):
•
IP address
•
Subnet mask
•
Standard gateway
•
First DNS server
•
Second DNS server
•
Connection time
I-Gate Configuration
This program allows the configuration of the I-Gate NIC with the possibility to rescan
the WLAN (in order to find an access point) and to write and clear of the WEP key.
The access point parameter cannot be configured here. For I-Gate access points
(minimum firmware version 2.1.5) it is possible to establish a HTTP connection with
the access point. The configuration menu is displayed in the Internet Explorer (see
5.3.3.2).
The following parameters can be configured with the I-Gate NIC configuration
program:
Parameter
Configuration
Mode
SSID
TxRate
PS Mode
WEP
Passphrase
Encryption
DHCP (e.g. with a WLAN):
Host name
Network password
Enable automatic connection
Automatic connection when receiving
e-mails
Disable automatic connection
When inactive automatically
disconnect after ... minutes
Do not disconnect automatically
Possible values/Range
• AdHoc, 802.11
• AdHoc
• Infrastructure
(any)
• Fully automatic
• 1 Mbps
• 2 Mbps
• Auto 1 or 2 Mbps
• 5.5 Mbps
• 11 Mbps
• Disabled
• Enabled
• Disabled
• 64 bit
• 128 bit
(any)
• 64 bit: 4 keys with 10
characters
• 128 bit: 1 key with 26
characters
Technical Description
SIMpad SL4
Version V2.0
selected
(none)
(none)
selected
(not selected)
(not selected)
selected, 0
(not selected)
Default value
Infrastructure
(none)
Fully automatic
Disabled
Disabled
(none)
(none)
20.08.01, David Brunner
43/74