Installing The Brother Peer To Peer Software - Brother NC-9100h Network User's Manual

Installing the Brother Peer to Peer Software

If you already installed the driver from the printer's CD-ROM
Installer and you selected "Brother Peer-to-Peer Network
Printer" during the installation then you do not need to install
the Brother Network Print Software again.
1
Start the CD-ROM installation menu program according to the
Quick Setup Guide.
2
Select the proper model and then the Software Installation
menu. Then select the appropriate menu to start the Brother
Network Print Software installation program.
3
Push the Next button in response to the Welcome message.
4
Select the Brother Peer to Peer Print (LPR) button.
5
Select the desired directory to install the Brother Peer to Peer
Print (LPR) files and push Next. The installation program will
create the directory for you if it does not already exist on your
disk.
6
Enter the Port name that you wish to use and click OK. The
default port name is BLP1. Whichever name you choose, it must
be unique and it MUST begin with BLP.
7
You must now enter the actual IP address of the Print/Fax
server in the Printer name or IP address field. If you have
edited the hosts file on your computer or are using Domain
Name System, you can also enter the name of the print server.
As the Print/Fax server supports TCP/IP and NetBIOS names,
you can also enter the NetBIOS name of the Print/Fax server.
The NetBIOS name can be seen in your printer configuration
page. By default the NetBIOS name will usually appear as
BRN_xxxxxx where xxxxxx is the last six digits of the Ethernet
address.
PEER TO PEER PRINTING 3 - 3