Brother NC-9100h Network User's Manual page 69

7
Change context if required and then double click the name of the
printer you created in step 3.
8
Click Assignments.
9
Click Add.
10
Change the context if necessary.
11
Select the print queue you created in step 5.
12
Click Configuration and set the Printer type to Other/
Unknown. Click OK.
13
Change the context if required, select Object from the menu bar
and then Create. When you get the New Object menu, select
Print/Fax server and then OK.
14
Enter the name of the Print/Fax server and select Create.
Enter the NetWare Print/Fax server name of the Print/Fax
server exactly as it appeared in the NetWare tab of the
BRAdmin Professional utility (this will generally be the
BRN_xxxxxx_P1 default service name, unless you changed
the name).
You can find the current service name and MAC address by
printing out the DCP/MFC configuration page. Refer to the
User's Guide Chapter 23 for information on how to print the
configuration page on your Printer/Fax server.
Important:
Do not assign a password to the Print/Fax server or it will not log in.
15
Double click on the name of your Print/Fax server. Click on
Assignments and then Add...
16
If necessary, change the directory context. Select the printer
you created in step 3 and click OK and then OK again.
17
Exit NWADMIN.
6 - 10 NOVELL NETWARE PRINTING