Chapter 7 Performing System Actions; Adding An Xstack Storage - D-Link DSN-1100 X Stack User Manual

Chapter 7 Performing System Actions

The System Actions panel is displayed in all views and always contains the following actions:
Volume Creation Wizard – launches the wizard for creating volumes. See section 3.2.

Add xStack Storage – adds an xStack Storage system to be managed by the xStack

Storage Management Center. See section 7.1.
Remove xStack Storage – removes an xStack Storage system from being managed by the

xStack Storage Management Center. See section 7.2.
Log Out – lets you log out of the current xStack Storage Management Center session. See

section 2.4.

7.1 Adding an xStack Storage

The Add xStack Storage action in the System Actions panel lets you add an xStack Storage
system to be managed by the xStack Storage Management Center. To perform this task, you
must know the IP address or host name of the xStack Storage to be managed.
To add an xStack Storage system:
1. Perform one of the following steps:
In the System Actions panel click Add xStack Storage.
–
On the File menu, click Add xStack Storage.
–
– Press Ctrl + A.
The Add xStack Storage screen appears (see Figure 7-1).
xStack Storage Management Center Software User's Guide 101