D-Link DSN-1100 X Stack User Manual page 22

4. The Management Port page provides fields for entering an IP address, subnet, default
gateway, and host name of the xStack Storage management port. The settings you specify
must be compatible with your local network and accessible to client computers that may
be used to access the xStack Storage Management Center. By default, the host name is
the model number of the array. If desired, you can change this name to one that is more
meaningful.
5. Click Next to continue. The Data Port page appears once for each data port on your
system (see Figure 2-4).
12 Chapter 2 Getting Started
Figure 2-3. Management Port Page