D-Link DSN-1100 X Stack User Manual page 58

3. See section 3.2.2 on page 36 to complete this procedure and record your settings in
Table C-1. Note that when you click Next on the Ready to Reconfigure screen, the
reconfiguration process starts and the Started Reconfiguring Volume screen
appears, with the name of the volume being reconfigured (see Figure 3-27). Click
Close to remove this screen.
During the volume reconfiguration, the Main Display in the Volume View can be
used to view the progress of the reconfiguration. In Figure 3-28, for example, the
Main Display shows that the reconfiguration of the HR Documents volume is 3%
complete. In addition, the activity indicator in the status bar moves from side to
side. At the end of the reconfiguration, the Starting Reconfiguring screen appears,
the reconfigured parameters appear in the Reconfigure tab in Volume View, and
the activity indicator stops moving.
48 Chapter 3 Managing Volumes
Figure 3-26. Volume Composition Page