Process Of Detection Of Original Size - Toshiba e-STUDIO200L Service Manual

6.6.2

Process of detection of original size

1) When the equipment is in the APS mode, the carriage-1 is set at its home position.
2) When the platen cover is opened, the sensors receive the light reflected from the original and if the
conditions for original size shown in a matrix of 4) are met, the size of the original is instantly
detected.
3) The output signal from each sensor is input to CPU on the SLG board to determine the size of the
original.
[ A4 Series ]
APS-R
APS-C
Reflection type
APS-3
photosensor
APS-2
APS-1
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[ LT Series ]
V
DD
Reflection type
CPU
photosensor
GND PWA-SLG
Fig. 6-15
e-STUDIO200L/202L/203L/230/232/233/280/282/283
6 - 13
V
DD
APS-R
APS-C
CPU
APS-3
APS-2
GND PWA-SL
SCANNER
6