Setting Your Changes As A New Default; Restoring All Settings To The Factory Default - Brother MFC-J6920DW Advanced User's Manual

Chapter 8
Setting your changes as a
new default
You can save the print settings you use most
often—such as Print Quality,
Paper Type, Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Colour Enhance, Cropping,
Borderless and Date Print—by setting
them as the default settings. These settings
will remain until you change them again.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it, and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Press your new setting.
Repeat this step for each setting you
want to change.
j
After changing the last setting, swipe up
or down, or press a or b to display
Set New Default.
k
Press Set New Default.
l
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
m
Press .
66
Restoring all settings to the
factory default
8
You can restore the PhotoCapture settings
you have changed—such as
Print Quality, Paper Type,
Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Colour Enhance, Cropping,
Borderless and Date Print—to the
factory default.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it, and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Factory Reset.
j
Press Factory Reset.
k
The Touchscreen asks you to confirm to
change back to the factory default.
Press Yes to confirm.
l
Press .
8