HOW TO PLACE THE MASSAGER
How to move the massager
When carried by two people.
Hold by the back rest and foot rest when moving.
●
Foot rest
NOTE
Before moving the massager, be sure to remove the
●
power plug from the outlet.
Be careful not to step on the power cord, remote
●
control or sensor during movement.
Be sure to move the massager with the assistance of
●
another person on an easily damaged floor surface
or concrete surface.
Decide where to place it
1
Lay a carpet, etc. on the set-up
area.
To prevent damaging the floor and muffle the
●
noise while massaging.
NOTE
Place the massager on a level floor surface.
●
Keep the massager at least 1m away from AV products like a TV or radio.
●
Otherwise, the program may be disturbed by noise.
Do not keep the massager in a place with high humidity like a bathroom.
●
Do not keep the massager in a place where it will be exposed to direct sunshine for an extended period, or in
●
a place near a heater where the temperature may reach high levels.
Back rest
Carpet
When moving using the casters.
Lift up the front and move using the casters.
●
Press the BEST POSITION
button to fold down the
back rest.
CAUTION
Do not suddenly release your hand while
●
raising the foot rest manually.
2
Ensure there is sufficient space
to allow the massager to recline.
In order not to touch the wall or other things
●
when reclined, allow a clearance of 50cm or
more to the front and 60cm or more to the
back.
Foot rest
50cm or
more
Casters
60cm or
more
Back rest
8