Original Does Not Feed In The Adf; Power And Control Panel Problems; Power Does Not Turn On; Lights Came On And Then Went Out - Epson XP-830 Series User Manual

User's Guide
Related Information
"Loading a CD/DVD" on page 44
&

Original Does Not Feed in the ADF

❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the edge guide.
❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again.
Related Information
"Available Originals for the ADF" on page 36
&
"Placing Originals on the ADF" on page 36
&
"Cleaning the ADF" on page 139
&

Power and Control Panel Problems

Power Does Not Turn On

❏ Hold down the
P
button for a little longer.
❏ Make sure the power cord is securely plugged in.

Lights Came On and then Went Out

The printer's voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then check
the label on the printer.
Caution:
!
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.

Power Does Not Turn Off

P
Hold down the button for a little longer. If you still cannot turn off the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it off by pressing the

LCD Screen Gets Dark

The printer is in sleep mode. Press anywhere on the LCD screen to return it to its former state.
Solving Problems
175
P
button.