Table of Contents
Advertisement
Creating custom schedules
1.
On the Protection Schedule page of the Protect Machine or Protect Multiple Machines Wizard, to
change the interval schedule for any period, do the following:
a. Select Periods.
The existing periods display and can be modified. Editable fields include a start time, end time,
and interval (in minutes) for each period.
b. Click in the interval field and type an appropriate interval in minutes.
For example, highlight the existing interval and replace it with the value 60 to perform snapshots
every 60 minutes in this period.
2.
To create a peak and off-peak period for weekdays, change the time range of the weekday period so
that it does not include a 24-hour period, set an optimal interval for the peak, select Take snapshots
for the remaining time and set an off-peak interval, by doing the following:
a. Select Periods.
The existing periods display and can be modified.
b. Click in the From box to change the start time for this period.
The Choose Time dialog box appears.
c. Drag the Hours and Minutes slider controls as appropriate for the desired start time, and then
click Done. To specify the current time, click Now.
d. Click in the To box to change the end time for this period.
The Choose Time dialog box appears.
e. Drag the Hours and Minutes slider controls as appropriate for the desired start time, and then
click Done. To specify the current time, click Now.
3.
To set a single time of day for a single backup to occur daily, select Daily protection time and then
enter a time in format HH:MM AM.
4.
To define the schedule without beginning backups, select Initially pause protection.
Once you pause protection from the wizard, it remains paused until you explicitly resume it. Once
you resume protection, backups will occur based on the schedule you established.
5.
Click Finish or Next.
Modifying protection schedules
You can modify the protection schedules for specific volumes on a machine.
To modify protection schedules:
1.
In the Core Console, select the machine with a defined protection schedule that you want to
change.
The Summary tab displays for the machine.
2.
Select the volumes for the protected machine that you want to change, and click Set a schedule. To
select all volumes at once, click in the checkbox in the header row.
Initially, all volumes share the same protection schedule. Typically, it is good practice to protect, at
minimum, the System Reserved volume and the volume with the operating system (typically the C
drive).
The Protection Schedule dialog box appears.
3.
On the Protection Schedule dialog box, if you previously created a protection schedule template
and want to apply it to this agent, select the template from the drop-down list, and then go to Step 9.
4.
If you want to save this new protection schedule as a template, enter a name for the template in the
text box.
38
Advertisement
Table of Contents
