Installing The Base Cover; Removing The Msata Ssd Card; Installing The Msata Ssd Card; Removing The Keyboard Trim - Dell Latitude E7240 Owner's Manual

Installing the Base Cover

1. Place the base cover to align with the screw holes correctly on the computer.
2. Tighten the screws to secure the base cover to the computer.
3. Install battery.
4. Follow the procedures in After Working Inside Your Computer.

Removing the mSATA SSD card

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
3. To remove the mSATA SSD card:
a. Remove the screw that secures the mSATA SSD card to the computer.
b. Disconnect the mSATA SSD card from the connector on the system board.

Installing the mSATA SSD card

1. Connect the mSATA SSD card to the connector on the system board.
2. Tighten the screw to secure the mSATA SSD to the computer.
3. Install:
a. base cover
b. battery
4. Follow the procedures in After Working Inside Your computer.

Removing the Keyboard Trim

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove battery.
3. Using a plastic scribe, pry the keyboard trim to release it from the computer. Lift up to remove the
keyboard trim from the computer.
14