Dell Latitude E7240 Owner's Manual page 40

Option
Block Sleep
Peak Shift
Advanced Battery Charge
Configuration
Primary Battery
Configuration
Intel Smart Connect
Technology
Table 9. POST Behavior
Option
Adapter Warnings
Keypad (Embedded)
40
Description
• Disabled - Does not allow the system to power on by special LAN
signals when it receives a wake-up signal from the LAN or wireless
LAN. (Default Setting)
• LAN Only - Allows the system to be powered on by special LAN
signals.
• WLAN Only
• LAN or WLAN
• LAN with PXE Boot
Allows you to block the computer from entering into the sleep state.
Option is disabled by default.
• Block Sleep (S3)
Peak Shift can be used to minimize AC consumption during peak powers
times of day. Set the start and end time to run in Peak Shift mode.
• Enable Peak Shift (Disabled)
Allows batteries in the system in Advanced Battery Charge Mode to
maximize battery health. This uses standard charging algorithm and
other techniques during non-work hours to maximize battery health
• Enable Advanced Battery Charge Mode(Disabled)
Allows you to define how to use the battery charge, when AC is plugged
in. The options are:
• Adaptive(Enabled)
• Standard Charge
• Express Charge
• Primary AC Use
• Custom Charge — you can set the percentage to which the battery
must charge.
The option is disabled by default. If option enables will periodically sense
nearby wireless connection while the system is asleep. It will synchronize
emails or social media application that were open when system entered
the sleep state.
• Smart Connection(Disabled)
Description
Allows you to activate the adapter warning messages when certain
power adapters are used. The option is enabled by default.
• Enable Adapter Warnings
Allows you to choose one of two mode it enable the keypad that us
embedded in the internal keyboard.
• Fn Key Only
• By Numlock