Option
Hyper-Thread Control
Rapid Start Technology
Table 8. Power Management
Option
AC Behavior
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN/WLAN
Description
Allows the computer to power-on automatically, when AC adapter is
plugged. The option is disabled.
•
Wake on AC
Allows you to set the time at which the computer must turn on
automatically. The options are:
•
Disabled (Default Setting)
•
Every Day
•
Weekdays
•
Select Days
Allows you to enable the USB devices to wake the computer from
standby mode. The option is disabled
•
Enable USB Wake Support
Allows you to control the WLAN and WWAN radio. The options are:
•
Control WLAN radio
•
Control WWAN radio
Default Setting: both the options are disabled.
This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply.
Description
Default Setting: Enable Intel
TurboBoost
Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
The Intel Rapid Start feature might
improve the battery life by automatically
putting the system into a low power
state during sleep after a user specified
time. The options are enabled by
default:
•
Intel Rapid Start Feature
•
Transition to Rapid Start when using
Timer
The Rapid Start Timer value can be
configure to put the system into Rapid
State as per requirement.
39