S-Register/At Command Cross-Reference - Motorola 326X V.34 User Manual

S-Register/AT Command Cross-Reference

This section shows the modem's S-Registers cross-referenced with AT Commands
and front panel options. (For details on S-Registers, refer to Chapter 5, Using the AT
Automatic Calling Interface.)
Table A-3.
S-Register Cross-Reference
A-38 Configuration Quick Reference
S-Register
S0—Ring Count to Answer On
S1—Ring Count
S2—Escape Code Character
S3—Carriage Return Character
S4—Line Feed Character
S5—Backspace Character
S6—Wait for Dial Tone
S7—Wait for Data Character
S7—Wait for Data Character
S8—Pause Time for Pause Delay Dial
Modifiers
S10—Carrier Loss Hang Up Delay
S11—DTMF Tone Duration
S12—Escape Code Guard Time
S18—Test Timer
S25—Delay Before Looking for DTR
S26—RTS/CTS Delay
S30—DTE Inactivity Disconnect
S38—Disconnect Buffer Delay
S45—Access Security Tone Duration
S46—Access Security Lead Digit Delay
Timeout
S96—Signalling System #5
S97—Break Signal Duration
S98—AC Detect
S99—V.32 Training Time
AT Command Front Panel Option
*
AT AA5 Answer=Using S0
— —
— —
— —
— —
— —
*
AT BD2 Blind Dial=S6
*
AT DD9 Dial Wait=S7
AT * TT5 Call Timeout=S7
AT * DP4 Pause Delay=S8
*
AT CD3 DCD Loss Dis=S10
*
AT TL1 Tone Length=S11
— —
— —
— —
*
AT DL4 RTS/CTS Delay=S26
AT * SI5 Inactivity=S30
AT * DB3 Delay=S38
— —
AT S96
* =0 to 1
AT S97
* =0 to 39
AT * S98
=0 to 1
AT * S99
=0 to 216