Front Panel Display - Motorola 326X V.34 User Manual

Table 3-1.
326X LEDs

Front Panel Display

The front panel has a 16-character alphanumeric LCD display (see Figure 3-2 or
3-3). You access the configuration menu tree through this display, to:
3-4 Getting Started
LED Name
CD Data Carrier
Detect
TR Data Terminal
Ready
RC/NC Remote Control/
Network Control
A/B A or B
ALM Alarm
• Configure the modem
• Store and view telephone numbers
• Initiate and answer calls
• View status information
• Run online tests
• Enter passwords and network addresses
Description
On when the local modem receives a carrier signal (as
defined by the current modulation mode) from the remote
modem or when the DCD parameter=High.
On when a DTR signal from a terminal is detected.
Flashes to indicate that the modem is under remote
configuration (via front panel or AT ACU).
On when the modem is under NMS control.
Enclosure cards only.
On when modem A front panel information is displayed.
Off when modem B front panel information is displayed.
To toggle between modem A and modem B front panels, hold
and then press .
Enclosure cards only.
On when a test is in progress or a modem failure occurs. With
the 3262/3267 Modem card, if one modem fails, the ALM
LED lights and remains lit regardless of which modem front
panel is being viewed.