Siemens Extraklasse 1300 Instruction Manual And Installation Instructions page 22

Example:
22
Delay Start" display and button
Before starting a programme, you can specifiy by
how many hours the Delay Start" should be delayed.
q Turn the programme selector to the desired
programme.
The Ready" indicator light is on.
The expected Finish In" time will be displayed.
q Press the Delay Start" button, 1 h" (h=hour)
appears in the display.
The point between the digit and the h" flashes.
q Press the Delay Start" button until the desired
number of hours is displayed.
i The Delay Start" time can be set by hours.
The time can be delayed up to a maximum
of 19 h".
If the Delay Start" time is set for 19h", you can
arrive at the Finish In" mode by pressing the
"Delay Start" button again.
The Delay Start" time begins running immediately
after setting. This is indicated by the point between
the digit and the h" flashing. The point flashes until
the Delay Start" time has elapsed.
i The Delay Start" time is counted down by the
hour.
The programme is automatically started after the
Delay Start" time has elapsed.
The indicator light of the respective programme
segment comes on. The Finish In" time appears in
the display.
i Changes to the Delay Start" time are possible at
any time, press the Delay Start" button until the
new number of hours appears, in order to do this.
The new Delay Start" time elapses without having
to restart the programme.