Bench Test And Configuration - Configuration Checks - Motorola PTP 300 Deployment Manual

Motorola network router user manual

Hide thumbs Also See for PTP 300:

Table of Contents

Bench Testing (Optional) - Configuration Checks

Step 10: Use a web browser to connect to IP

address

http://169.254.1.1

for Slave and

http://169.254.1.2

for Master units. Select

'System Administration' and 'Login'. (The

password will be empty for new units). We

recommend that you change the password by

selecting 'Change Password' in the Menu

bar.

Step 11: You may wish to upgrade the software. If so, select 'Software Upgrade' and follow

the on-screen instruction. Latest software is available from our web site:

(http://motorola.motowi4solutions.com/software/#ptp)

Step 12: Check the License Key informa-

tion and ensure you are using the correct

Region Code. Otherwise, select 'License

Key' and replace with the alternative key

supplied and reboot the unit.

Step 13: Access the 'Installation

Wizard', 'Wireless Configuration'

page . Confirm the target MAC Ad-

dress, Master Slave Mode and other

configuration choices. Reboot the

unit.

If testing connectorized ODUs, con-

nect them together.

Repeat steps 1-13 for the paired unit

and check that the status of the link

shows UP on the 'Status Page'.

Table of Contents

Ptp 500