Table of Contents
Advertisement
2 - HOW TO USE THE CERAMIC HOB
Before you switch the hob on make sure
that it is clean.
To switch a cooking zone on you must
turn the relevant control knob anticlock-
wise.
When the hob is on, the power on light
(5) see fig. 1.2 is lit-up.
When the temperature of a cooking zone
is over 60°C, the relevant warning light
(6) see fig. 1.2 is also lit-up to warn of
heat on the surface of the hob.
This light also stays on after the cooking
zone has been switched off to show that
the hob surface is still hot.
This residual heat lasts for a rather long
time after the cooking zone has been
switched off.
During this time you should avoid
touching the hob surface over the
cooking plate; Keep children aware
from the cooking hob.
The light will switch off automatically as
soon as the surface temperature of the
cooking zone falls below 60°C.
6
0
1
Fig. 2.1
5
4
3
2
3 CIRCUIT RADIANT ZONES
Incorporating 3 heating elements (fig.
2.2) you can control and light up all 3
together or separately by selecting from
the 6 positions on the control knob
(fig. 2.1).
The working temperature required is
reached in a very short time.
Fig. 2.2
7
Advertisement
Table of Contents
