System Ip Address - NEC SL1100 Installation Instructions Manual
Hide thumbs
Also See for SL1100:
- Features and specifications manual (864 pages) ,
- Programming manual (650 pages) ,
- Networking manual (292 pages)
Advertisement
6. In the Command Prompt Window, Type arp –a and Press Enter.
This will display all of the IP Addresses currently in use on your Network.
7.
Locate the Last DYNAMIC IP Address and create a brand new IP Addresses that immediately
follow after that number. This IP Address will be the System IP Address of the SL1100.
Here's an Example:
In the example picture above, the Last DYNAMIC IP Address is 192.168.1.
so our new IP Addresses would be:
SYSTEM IP ADDRESS: 192.168.1.
Based on YOUR Last DYNAMIC IP Address, write your new IP Addresses here:
SYSTEM IP ADDRESS:
8. Again, if you have an IT Administrator, it is important to confirm with them that your two (2) new
addresses are available for use on your phone system and will not interfere with any other
devices on your network.
6
1-888-632-3794 • info@necsl1100distributors.com
SL1100 Installation Instructions
5
.
.
3
Advertisement
