NEC SL1100 Installation Instructions Manual page 9

Hide thumbs Also See for SL1100:

3. For this example your router should either be plugged directly into a modem OR not plugged into a

modem at all. AT NO POINT should your router be plugged into another router! The Router is only

being used to assign IP addresses for PC Pro programming purposes.

4. Turn on the NEC SL1100 and wait for the phones and KSU to power up (approx. 3-5 minutes).

5. Go to any phone and press the Menu Key, then 96. (The Menu Key is the unmarked Circular Button

on the lower right corner on the front of the phone)

6. Press Menu again to display the System IP Address.

7. Write down the IP address. This will be the IP Address used in PC Pro to connect to the phone

system.

SYSTEM IP ADDRESS: ________________________________

Part 2: Connecting to the SL1100 with the PC PRO System Administrator

1. Open the PC Pro System Administrator on the computer that is connected to the same router as the

phone system.

2. Click the Connect Button in the upper left-hand corner.

3. Under Connection Type, Enter the SYSTEM IP Address you wrote down during Part 1.

4. Enter the User Name: sltech (all lower case with no spaces).

5. Enter the Password: 12345678 (no spaces or other characters).

6. Click connect.

1-888-632-3794 • info@necsl1100distributors.com

SL1100 Installation Instructions

SL1100 SYSTEM IP Address from Part 1

sltech

12345678

Table of Contents