Toro Groundsmaster 4100-D Service Manual page 270

Gear Pattern Movement Summary
Every gear has a characteristic pattern. The illustrations
show typical patterns only and explain how patterns shift
as gear location is changed.
1. If contact is toward the heel or base of the gear (Fig.
46):
A. Install thicker or additional bearing case shim(s)
to move pinion shaft toward ring gear.
B. Install thinner or remove differential bearing
shim(s) to move ring gear backward.
C. Repeat until proper tooth contact and pinion gear
to ring gear backlash are correct.
2. If contact is toward the toe or tip of the gear (Fig. 47):
A. Install thinner or remove bearing case shim(s) to
move pinion shaft away from ring gear.
B. Install thicker or additional differential bearing
shim(s) to move ring gear forward.
C. Repeat until proper tooth contact and pinion gear
to ring gear backlash are correct.
Axles, Planetaries and Brakes
Heel Contact
Toe Contact
Page 6 - - 36
Base Contact
Figure 46
Tip Contact
Figure 47
Groundsmaster 4100--D/4110--D