Troubleshooting
11.5.2 For Paper Feed Unit (TRAY 2)
When the following message appears:
TEXT
1. Slide out the Paper Drawer and press down the
P
aper Lifting Plate.
2. Load the paper stack into the Paper Drawer so that its front
side faces up. Make sure that the paper stack rests under
the two catches of the Paper Drawer.
NOTE:
The paper should be loaded no higher than the
Edge Guide.
3. Gently slide the Paper Drawer back in.
1
OR
:EMPTY
11-10
*CAUTION!*
NO PAPER(
(Max. Level Indicator) on the
)