Product Light Status - Epson L310 User Manual

Product Light Status

You can often diagnose problems with your product by checking its lights.
Lights
1
power
2 paper and
Light status
The power light is on
The power light is flashing
The paper light is on
The paper light is flashing
The power light is on
The ink light is on
The paper light is flashing
The ink light is flashing
ink
Condition/solution
The product is turned on.
The product is busy. Wait for the
turning off the product.
If you just filled the ink, the
minutes. Do not cancel this process.
No paper is loaded or multiple sheets fed at one time. Load paper in the
product, and press the
Paper is jammed in the product. Remove the jammed paper, and press
the stop button to clear the error.
Initial ink charging may not be complete. See the Start Here poster for
instructions.
The ink pads need to be replaced. You must contact Epson for support.
87
power light to stop flashing before
power light will flash for approximately 20
stop button to clear the error.