Table of Contents
Advertisement
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AL110H) recommended).
Each additional handset must be registered on the
base station in order for it to work properly!
1. On the handset
¢
¢
¢
¢
MENU
Settings
Register HS
Enter the system PIN of the base
station (default is 0000)
Registering flashes in the display.
2. On the base station
within 60 sec. of entering the system PIN, press and
hold the registration/paging key (
(min. 3 sec.).
Registration takes approx. 1 minute.
Handsets are assigned the lowest available internal
number (1-4). If the internal numbers 1–4 are already
assigned to other devices, the number 4 will be over-
written.
De-registering handsets
Handsets can only be de-registered by resetting the
¢
base station to its default settings. This will also reset
every other setting
If you have only registered handsets for other GAP-
¢
compatible devices, these can only be de-registered
with a hardware reset
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
¢
~
◆
¢
(1...4, enter internal number of the
INT
¢
handset)
OK
, the handset is called or
P
◆
star key
INT
called.
When a participant answers you can speak to them.
a
To end the call, press
¢
¢
OK
Handset
OK
¢
OK
.
¢
p. 1)
p. 10.
p. 10.
¢
, all handsets are
OK
.
9
Internal consultation call/connecting
a call
You are in conversation with an external participant.
Press the
key and call one or all handsets. The
INT
external participant hears the hold music.
◆
Before the internal participant has answered,
press the end call key
participant who answers the call.
◆
After the internal participant has answered, you
can talk to him. Press the end call key
diverted, or press the display key ; you are recon-
nected to the external participant.
Listening in to an external call
You are conducting an external call. An internal par-
ticipant can listen in on this call and take part in the
conversation (conference).
Precondition: The
Listening in
vated.
Activating/deactivating listening in
¢
¢
¢
¢
MENU
Settings
Listening in
Internal listening in (conference)
You want to listen in to an existing external call.
Briefly press and hold the
the call. All participants hear a signal tone.
To end: press the end call key
a signal tone.
If the first internal participant presses the end call key
a
, the handset that has "listened in" remains con-
nected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
¢
¢
MENU
Alarm Clock
‰
OK (
= on)
When activated:
¢
Set the wake-up time
When the alarm clock rings, press any key to switch it
off for 24 hours. If the alarm clock is set, the wake-up
l
icon
will appear on the screen and the wake-up
time will be displayed instead of the date.
Setting the wake-up time
¢
¢
MENU
Alarm Clock
OK
Enter the wake-up time in hours and minutes, then
press
.
OK
a
; the call is diverted to the
a
; the call is
function must be acti-
¢
¢
OK
Base
OK
‰
OK (
= on)
c
key. You can listen in to
a
. All participants hear
¢
¢
OK
Activation
¢
OK
¢
¢
OK
Wake-up time
Advertisement
Table of Contents
