Acer Altos R360 F2 Frequently Asked Questions Manual page 53

Altos R360 F2 FAQ (Frequently Asked Questions)
4. Can I install both SAS and SATA HDD on Altos R360 F2 with onboard SAS/SATA software RAID?
ANSWER: Yes, but please create separated RAID volumes with SAS and SATA HDD, respectively. ANSWER: ANSWER: ANSWER:
For example, you may create 2 x SATA HDD as RAID 1, 1 x SAS HDD as RAID 0.
But, please don't create a RAID volume with mix of SATA and SAS HDD.
5. What's the PIN 11 (P11) of SATA HDD?
ANSWER: The SATA HDD interface with the host I/O bus via the Serial ATA interface connection illustrated in ANSWER: ANSWER: ANSWER:
below figure.
Below table identifies the pin definition of the SATA connectors and the corresponding signal names and
signal functions (based on Western Digital SATA HDD).
6. What's the benefit if the HDD Access LED is driven by PIN 11 (P11) of SATA HDD?
ANSWER: Some SAS/SATA RAID controller does not support SGPIO (Serial General Purpose Input/Ouput) ANSWER: ANSWER: ANSWER:
protocol. Hence, HDD Access LED won't function (blink) if the SGPIO based SAS disk cage is connected to the
53