Acer Altos R360 F2 Frequently Asked Questions Manual page 58

Altos R360 F2 FAQ (Frequently Asked Questions)
5. How do I know the version of BIOS and firmware of MegaRAID?
ANSWER: You would see below MegaRAID 9240-4i related information during POST: ANSWER:
ANSWER: ANSWER:
LSI MegaRAID SAS-MFI BIOS
Version 4.24.00
Copyright(c) 2010 LSI Corporation
HA –0 (Bus 2 Dev 0) LSI MegaRAID SAS MR9240-4i
FW package: 20.10.1-0037
Battery Status: Not present
PCU SLOT ID
-------- --
1
0 Virtual Drive(s) Found on the host adapter.
0 Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS or press <Ctrl><Y> for Preboot CLI
In this example, the BIOS version is 4.24.00, and the firmware package version is 20.10.1-0037.
NOTE. This POST information of MegaRAID would be available for both UEFI mode and legacy mode on Altos
R360 F2.
6. How do I configure MegaRAID in legacy mode?
ANSWER: Please press CTRL-H when you see below information during POST. ANSWER: ANSWER: ANSWER:
LSI MegaRAID SAS-MFI BIOS
Version 4.24.00 (Build June 03, 2010)
Copyright(c) 2010 LSI Corporation
HA –0 (Bus 2 Dev 0) LSI MegaRAID SAS MR9240-4i
FW package: 20.10.1-0037
Battery Status: Not present
(Build June 03, 2010)
LUN VENDOR PRODUCT
--- ------- -------
LSI LSI MegaRAID SAS MR9240-4i
REVSION
-------
58
CAPACITY
--------
0MB