Mechanical Installation; Table 2-1 Dimensions And Torques Of Micromaster 440 - Siemens MICROMASTER 440 Operating Instructions Manual

Issue B1
2.3

Mechanical installation

WARNING
♦
To ensure the safe operation of the equipment, it must be installed and
commissioned by qualified personnel in full compliance with the warnings laid
down in these operating instructions.
♦
Take particular note of the general and regional installation and safety
regulations regarding work on dangerous voltage installations (e.g. EN
50178), as well as the relevant regulations regarding the correct use of tools
and personal protective equipment (PPE).
♦
The mains input, DC and motor terminals, can carry dangerous voltages even
if the inverter is inoperative; wait 5 minutes to allow the unit to discharge after
switching off before carrying out any installation work.
♦
The inverters can be mounted adjacent to each other. If they are mounted on
top of each other, however, a clearance of 100 mm has to be observed.
Table 2-1 Dimensions and Torques of MICROMASTER 440
Frame-Size Overall Dimensions
Width x mm 73 x 173 x 149
Height x
A
inch 2.87 x 6.81 x 5.87
Depth
Width x mm 149 x 202 x 172
Height x
B
inch 5.87 x 7.95 x 6.77
Depth
Width x mm 185 x 245 x 195
Height x
C
inch 7.28 x 9.65 x 7.68
Depth
Width x mm 275 x 520 x 245
Height x
D
inch 10.82 x 20.47 x 9.65
Depth
Width x mm 275 x 650 x 245
Height x
E
inch 10.82 x 25.59 x 9.65
Depth
350 x 850 mm x 320
mm
Width x
height with filter 1150
Height x
F
13.78 x 33.46 x 12.60
Depth
inch
height with filter 45.28
MICROMASTER 440 Operating Instructions
6SE6400-5AC00-0BP0
4
Fixing Method
2 x M4 Bolts
2 x M4 Nuts
2 x M4 Washers for fitting on standard rail
4 x M4 Bolts
4 x M4 Nuts
4 x M4 Washers
4 x M5 Bolts
4 x M5 Nuts
4 x M5 Washers
4 x M8 Bolts
4 x M8 Nuts
4 x M8 Washers
4 x M8 Bolts
4 x M8 Nuts
4 x M8 Washers
4 x M8 Bolts
4 x M8 Nuts
4 x M8 Washers
2 Installation
Tightening
Torque
2.5 Nm
with washers fitted
2.5 Nm
with washers fitted
2.5 Nm
with washers fitted
3.0 Nm
with washers fitted
3.0 Nm
with washers fitted
3.0 Nm
with washers fitted
23