Synchronize Peer Group - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration
AP Profiles
MAC Authentication DB
Captive Portal
rADiUs Client
Controller Provisioning Mode
Mutual Authentication Mode
Unmanaged AP
reprovisioning Mode
Path: Wireless > Peer Group > Peer Status
Synchronize the settings among the peer group.
1. Click Wireless > Peer Group > Peer Status. Peer Status List will appear
2. Click Start Sync for All Peers to synchronize the settings to all controllers, or synchronize one of the
peer group by right-clicking Start Sync.
D-Link DWC-1000 User Manual
Enable this field to include all AP profiles in the configuration that the controller
pushes to its peers. The AP profile includes the general AP settings, such as the
hardware type, Radio settings, SSID Profiles, and QoS settings.
Enable this field to include the MAC Authentication Database in the configuration
that the controller pushes to its peers.
Enable this field to include the Captive Portal information in the configuration that
the controller pushes to its peers.
Enable this field to include the Client RADIUS information in the configuration that
the controller pushes to its peers.
Enable this field to send and receive provisioning messages. As a security feature, you
can disable this option.
Select Enable to require mutual authentication on the wireless network. When
Disable is selected, mutual authentication is not required.
Changing this parameter on one controller automatically updates the configuration
on all other controllers in the cluster and all managed APs in the cluster.
When this field is enabled, switch provisioning must be enabled in order for new
controllers to be added to the cluster. If controller provisioning is disabled, the cluster
will not accept certificates from a new controller.
Enable to allow access points to accept provisioning information when not managed
by a controller.

synchronize Peer Group

112