Igmp Setup - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
Note: This feature is only available when the DCS-1000-VPN license is activated.
Path: Network > LAN > IGMP Setup
IGMP snooping (IGMP Proxy) allows the controller to 'listen' in on IGMP network traffic. This then allows the
controller to filter multicast traffic and direct it only to hosts that need this stream. This is helpful when there is a
lot of multicast traffic on the network where all LAN hosts do not need to receive this multicast traffic.
To enable IGMP Proxy:
1. Click Network > LAN > IGMP Setup.
2. Toggle IGMP Proxy to On.
3. Click Save.
4. Click Add new Network Address. Enter a network address and mask length.
5. Click Save.
D-Link DWC-1000 User Manual

iGMP setup

131