Setup Cos And Dscp Marking - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
Path: Network > QoS > CoS DSCP Marking
Remarking CoS to DSCP is an advanced QoS configuration, where the Layer 2 quality of service field is translated
to a Layer 3 QoS field in the packet, so that upstream routers can make a QoS decision based on the DSCP
field set in the packet. Once you enable CoS to DSCP marking by choosing the check box, you can choose the
appropriate value of the DSCP for a given CoS value.
1. Go to Network > QoS > CoS DSCP Marking.
2. Enable CoS and DSCP Marking and click Save.
3. Right-click on the CoS and select Edit.
4. Select the CoS and DSCP values, and then click Save.
D-Link DWC-1000 User Manual

setup Cos and DsCP Marking

186