Panasonic DBS576 Technical Manual page 224

Chapter 5. Key Telephone Features
Operation
To enable Variable Mode:
1. Press the ON/OFF key.
2. Press the Variable Mode FF key
3. Press the ON/OFF key.
To Execute a Variable Mode Function:
1. Press the NEXT or PREV keys on the large display tele-
phone or the up or down arrow keys on the small display
telephones until the desired function appears
2. Press the soft key next to the desired function
To cancel Variable Mode:
1. Press the ON/OFF key.
2. Press the Variable Mode FF key.
3. Press the ON/OFF key again.
To assign Variable Mode Functions to a Small Display Telephone
1. Press the ON/OFF key.
2. Press PROG + 95 + (XX) + Fixed Feature Code (see
Table 5 on page 5-52).
OR...
Press PROG + 95 + (XX) + REDIAL + Flexible Feature
Code (see Table 5 on page 5-52).
Note: Where XX is the Flexible Screen position as listed
below.
3. Press the ON/OFF key.
5-100
Action
Action
Action
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
AUTO FNC Mode displays
Programmed features display
Result
The variable mode function executes
Result
AUTO FNC Mode displays
Result
The variable mode function executes
576-36-700