Connecting The Usb Nano Receiver - Silvercrest OM1008-SL Manual

Connecting the USB Nano Receiver

If you still have your old mouse connected to the computer, please
shut down your computer, disconnect the device and restart the
computer.
Plug the USB nano receiver (13) into a free USB port on your
powered-on computer.
The operating system will detect the new hardware and will
automatically install the corresponding drivers. Depending on the
operating system, one of the following messages will appear:
Under Windows
When connecting the receiver for the first time, the operating
system will prompt "Found New Hardware". Wait until the
message "Your new hardware is installed and ready to use"
appears before using the wireless mouse.
Under Windows Vista
When connecting the receiver for the first time, the operating
system will prompt "Installing device driver software". Wait until
the message "Your devices are ready to use" appears. Your
wireless mouse has been successfully configured and can now
be used.
®
XP
®
, Windows
Wireless Mouse OM1008-SL
®
7
English - 15