3 INSTALLATION
Connecting an A/V Receiver, TV, and VCR
1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the DCX
set-top and the INPUT L and R connectors on the A/V receiver.
2. Connect a video cable to the video out connector on the DCX set-top and the
cable/TV video connector on the A/V receiver.
3. Connect a stereo audio cable to the VCR AUDIO OUT L and R connectors on the A/V
receiver and the INPUT AUDIO L and R connectors on the stereo VCR.
4. Connect a stereo audio cable to the OUTPUT AUDIO OUT L and R connectors on the
stereo VCR and the VCR AUDIO IN L and R connectors on the A/V receiver.
5. Connect a video cable to the input video connector on the stereo VCR and the video
VCR OUT connector on the A/V receiver.
6. Connect a video cable to the output video connector on the stereo VCR and the
video VCR IN connector on the A/V receiver.
7. Connect a video cable to the input video connector on the Stereo TV (SDTV) and the
TV/monitor output video connector on the A/V receiver.
If the equipment supports it:
•
The digital audio (OPTICAL S/PDIF or COAXIAL S/PDIF) audio outputs may be
used in place of the stereo audio outputs (AUDIO L and R). These outputs offer a
higher level of audio quality, including support for Dolby
•
S-Video connections may be used in place of the standard composite video
connections. S-Video offers a higher level of standard definition video quality
than composite video.
19
®
Digital 5.1 audio.