Diagnostics; Using The Diagnostics - Motorola DCX3200 Installation Manual

4 DIAGNOSTICS

Diagnostics are displayed on the on-screen display (OSD). They confirm proper
installation, including:
•
Checking error states and signal integrity.
•
Identifying the cable terminal on the network.
•
Verify communications with the headend.
For the diagnostics described in this section:
•
All indicators are in decimal notation, unless otherwise noted.
•
All signal-level and quality indicators use a 1% to 100% scale, unless otherwise
noted.
•
All sample displays are illustrative; actual data may differ from the examples.

Using the Diagnostics

To use the diagnostics:
1. Ensure that the DCX3200 is installed with the Thin Client software and that it is
connected to an AC outlet.
2. Ensure the set-top is powered on.
3. Press
POWER
4. Within two (2) seconds press
mode.
5. The Diagnostics main menu is displayed on the OSD.
You can use the following keys to navigate the diagnostics menus:
•
Press channel ▲, channel ▼, cursor ▲, or cursor ▼ to select d01 through E.
•
Press cursor ◄, cursor ►, select or enter to execute the selected diagnostic.
•
Select E from the main menu or press power to exit.
on the remote control to put the set-top in stand=bay mode.
SELECT
on the remote control to enable diagnostic
33