Toshiba E-studio 5520c Safety Information Manual page 21

1.GENERAL PRECAUTIONS
When removing the plug from the outlet, do not pull the power cord. Always hold the plug when removing it from the
outlet. If the power cord is pulled, the wires may become broken and this could cause a fire or give you an electric
shock.
Make sure that the ventilation holes are not blocked up.
If the temperature within the Multifunctional Digital Systems becomes too high, a fire could result.
For e-STUDIO5520C/6520C/6530C and e-STUDIO555/655/755/855
There are 4 adjusters (stoppers) at the bottom of the equipment (2 in the rear, 2 in the front). After moving/installing the
equipment, be sure to turn and lower the adjusters, and then fix them firmly on the floor.
Before moving the equipment, turn and raise the adjusters.
e-STUDIO5520C/6520C/6530C
e-STUDIO555/655/755/855
For e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
The Paper Feed Pedestal (optional) has 4 antiskid devices and 2 fall-preventing stoppers under its bottom. When
moving this equipment, turn them in the direction of arrows (see figures below) and raise them to unfix the equipment.
After it has been moved, be sure to turn them in the opposite direction and lower them to fix it.
1 GENERAL PRECAUTIONS
General Precautions 19