Toshiba E-studio 5520c Safety Information Manual page 8

For U.S.A. and Canada
USE OF RECYCLED PAPER IN THE COPIER
As with all copiers and reproduction devices, the use of the appropriate paper ensures the best image quality of the copies and the
machine's performance and reliability.
Because of the extreme variances in composition and quality of paper from various manufacturers, consumers should ensure the
recycled paper they use is suitable for the copier. In accordance with the EPA Energy Star Program guidelines, TOSHIBA
recommends the following recycled paper for use in the copier-
Great White MultiUse 20 paper
If you have any questions regarding the use of recycled paper in your copier, contact your authorized service technician.
Regulatory Information
Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of the Rechargeable Battery Recycling
Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-822-8837.
Notice regarding CR coin cell batteries, applicable to California, U.S.A. only: Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Hg
The high efficiency LCD backlights used in this product contains 5 mg or less of Mercury, the disposal of which may be regulated
due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).
e-STUDIO5520C/6520C/6530C
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 13.3 mW, wave length 788 nm, continuous pulse.
e-STUDIO2330C/2830C/3530C/4520C
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 25 mW, wave length 790 nm, continuous pulse.
e-STUDIO205L/255/305/355/455
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 7 mW, wave length 785 nm, continuous pulse.
e-STUDIO555/655/755/855
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 10 mW, wave length 788 nm, continuous pulse.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
For Canada only
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à la norme NMB-003 du Canada.
Except U.S.A. and Canada
e-STUDIO5520C/6520C/6530C
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 13.3 mW, wave length 788 nm, continuous pulse.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 25 mW, wave length 790 nm, continuous pulse.
e-STUDIO205L/255/305/355/455
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 7 mW, wave length 785 nm, continuous pulse.
e-STUDIO555/655/755/855
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments.
The unit uses laser diode of output 10 mW, wave length 788 nm, continuous pulse.
Caution:
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
6 Notice to Users