1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Two-Way Radio
  5. RMU2040
  6. Quick reference

Motorola RMU2040 Quick Reference

Rm series
Hide thumbs Also See for RMU2040:
Table of Contents

Advertisement

Quick Links

See also: User Manual
RM SERIES
BUILT TOUGH
TO DO
BUSINESS
BETTER
QUICK REFERENCE
GUIDE FOR
RADIO FEATURES
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved. Specifications are subject to change without notice. All specifications
shown are typical.

Advertisement

Table of Contents
loading

Related Manuals for Motorola RMU2040

Summary of Contents for Motorola RMU2040

  • Page 1 MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved. Specifications are subject to change without notice. All specifications...
  • Page 2 RM Series Select your model by clicking over the image RMU2040 RMU2043 RMU2080 RMU2080d RMU2050 RMV2080...
  • Page 3 RMU2040 QUICK REFERENCE GUIDE DEFAULT VALUES MODEL FEATURES FACTORY DEFAULT DISABLE TONES IVOX RMU2040 CHANNEL ANNOUNCEMENT POWER UP AUDIO ADVANCED CONFIGURATION...

  • Page 4: Default Values

    RMU2040 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: Power Up Audio: Battery level + Channel CHAN FREQ CODE 2 - 464.5500 1 – 67.0 Hz PTT (Push-to-Talk) Button 8 - 467.9250 1 – 67.0 Hz SB1 – Monitor Button 5 - 467.8500...
  • Page 5 RM SERIES NON-DISPLAY RADIO FEATURES Antenna On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill SB1 – Monitor Button Lithium Ion Battery SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...

  • Page 6: Factory Settings Reset

    Volume Knob with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies. PTT (Push-to-Talk) Button SB1 – Monitor Button SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 7 RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 8 RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed . PTT (Push-to-Talk) Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 9 Volume Knob 1. Use the Customer 2) Attach Programming Software accessory (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3. Power up with VOX accessory attached Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 10 RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 11 SB1 + SB2 at the same time. OPTIONS: 1. Battery level + Channel # 2. Channel # 3. Silent SB1 – Monitor Button SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 12 RM SERIES Advanced Configuration To enter the On/Off Volume Knob Advanced Configuration menu, power up pressing PTT + SB1 button PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 13 CH 1 Code Channel 1) The radio provides voice feedback of the Auto Scan mode entered PTT (Push-to-Talk) Button “Programming 2) Press PTT to Mode, cycle through the Channel 1” Advanced Configuration Menu options Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 14 Frequency Active CH 1 Code Channel Select from the list of pre-programmed frequencies Auto Scan “Frequency x, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 15 Code Menu 2) Select from the list Auto Scan of pre-programmed codes “Code x, To change press SB1 – Monitor Button side button 1 SB2 – Channel Select or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 16 Auto Scan menu 2) Enable / disable by Auto Scan pressing SB1 or “Auto Scan Disabled, To change press SB1 – Monitor Button side button 1 or SB2 – Channel Select 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 17 Active Channel menu 2) Add / remove Auto Scan channels by pressing SB1 or “Active Channels 2, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 18 Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the “Channel 1” Advanced Configuration Menu options for Channel 2 Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 19 2) Press and hold PTT until you cycle back to top of programming menu and hear a ‘beep” then press and hold PTT until you hear Power up 2) PTT (Push-to-Talk) Audio Button “Battery level high, Channel 1” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 20 RM SERIES BUILT TOUGH TO DO BUSINESS BETTER...
  • Page 21 RMU2043 QUICK REFERENCE GUIDE DEFAULT VALUES MODEL FEATURES FACTORY DEFAULT DISABLE TONES IVOX RMU2043 CHANNEL ANNOUNCEMENT POWER UP AUDIO ADVANCED CONFIGURATION...

  • Page 22: Default Values

    RMU2043 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: Power Up Audio: Battery level + Channel CHAN FREQ CODE 1 - 458.6625 1 – 67.0 Hz PTT (Push-to-Talk) Button 2 – 469.2625 1 – 67.0 Hz SB1 – Monitor Button 1 - 458.6625 2 –...
  • Page 23 RM SERIES NON-DISPLAY RADIO FEATURES Antenna On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill SB1 – Monitor Button Lithium Ion Battery SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...

  • Page 24: Factory Settings Reset

    Volume Knob with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies. PTT (Push-to-Talk) Button SB1 – Monitor Button SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 25 RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 26 RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed . PTT (Push-to-Talk) Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 27 Volume Knob 1. Use the Customer 2) Attach Programming Software accessory (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3. Power up with VOX accessory attached Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 28 RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 29 SB1 + SB2 at the same time. OPTIONS: 1. Battery level + Channel # 2. Channel # 3. Silent SB1 – Monitor Button SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 30 RM SERIES Advanced Configuration To enter the On/Off Volume Knob Advanced Configuration menu, power up pressing PTT + SB1 button PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 31 CH 1 Code Channel 1) The radio provides voice feedback of the Auto Scan mode entered PTT (Push-to-Talk) Button “Programming 2) Press PTT to Mode, cycle through the Channel 1” Advanced Configuration Menu options Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 32 Frequency Active CH 1 Code Channel Select from the list of pre-programmed frequencies Auto Scan “Frequency x, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 33 Code Menu 2) Select from the list Auto Scan of pre-programmed codes “Code x, To change press SB1 – Monitor Button side button 1 SB2 – Channel Select or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 34 Auto Scan menu 2) Enable / disable by Auto Scan pressing SB1 or “Auto Scan Disabled, To change press SB1 – Monitor Button side button 1 or SB2 – Channel Select 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 35 Active Channel menu 2) Add / remove Auto Scan channels by pressing SB1 or “Active Channels 2, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 36 Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the “Channel 1” Advanced Configuration Menu options for Channel 2 Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 37 2) Press and hold PTT until you cycle back to top of programming menu and hear a ‘beep” then press and hold PTT until you hear Power up 2) PTT (Push-to-Talk) Audio Button “Battery level high, Channel 1” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 38 RM SERIES BUILT TOUGH TO DO BUSINESS BETTER...
  • Page 39 RMU2050 QUICK REFERENCE GUIDE DEFAULT VALUES MODEL FEATURES FACTORY DEFAULT DISABLE TONES IVOX RMU2050 CHANNEL ANNOUNCEMENT POWER UP AUDIO ADVANCED CONFIGURATION...

  • Page 40: Default Values

    RMM2050 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: Power Up Audio: Battery level + Channel CHAN FREQ CODE 154.7000 1 – 67.0 Hz 154.6000 1 – 67.0 Hz PTT (Push-to-Talk) Button 151.8200 1 – 67.0 Hz SB1 – Monitor Button 151.8800 1 –...
  • Page 41 RM SERIES NON-DISPLAY RADIO FEATURES Antenna On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill SB1 – Monitor Button Lithium Ion Battery SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...

  • Page 42: Factory Settings Reset

    Volume Knob with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies. PTT (Push-to-Talk) Button SB1 – Monitor Button SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 43 RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 44 RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed . PTT (Push-to-Talk) Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 45 Volume Knob 1. Use the Customer 2) Attach Programming Software accessory (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3. Power up with VOX accessory attached Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 46 RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 47 SB1 + SB2 at the same time. OPTIONS: 1. Battery level + Channel # 2. Channel # 3. Silent SB1 – Monitor Button SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 48 RM SERIES Advanced Configuration To enter the On/Off Volume Knob Advanced Configuration menu, power up pressing PTT + SB1 button PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 49 CH 1 Code Channel 1) The radio provides voice feedback of the Auto Scan mode entered PTT (Push-to-Talk) Button “Programming 2) Press PTT to Mode, cycle through the Channel 1” Advanced Configuration Menu options Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 50 Frequency Active CH 1 Code Channel Select from the list of pre-programmed frequencies Auto Scan “Frequency x, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 51 Code Menu 2) Select from the list Auto Scan of pre-programmed codes “Code x, To change press SB1 – Monitor Button side button 1 SB2 – Channel Select or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 52 Auto Scan menu 2) Enable / disable by Auto Scan pressing SB1 or “Auto Scan Disabled, To change press SB1 – Monitor Button side button 1 or SB2 – Channel Select 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 53 Active Channel menu 2) Add / remove Auto Scan channels by pressing SB1 or “Active Channels 2, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 54 Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the “Channel 1” Advanced Configuration Menu options for Channel 2 Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 55 2) Press and hold PTT until you cycle back to top of programming menu and hear a ‘beep” then press and hold PTT until you hear Power up 2) PTT (Push-to-Talk) Audio Button “Battery level high, Channel 1” Applies to RMU2040 / RMU2043 / RMM2050...
  • Page 56 RM SERIES BUILT TOUGH TO DO BUSINESS BETTER...
  • Page 57 RMU2080 QUICK REFERENCE GUIDE DEFAULT VALUES MODEL FEATURES FACTORY DEFAULT DISABLE TONES IVOX RMU2080 CHANNEL ANNOUNCEMENT POWER UP AUDIO ADVANCED CONFIGURATION...

  • Page 58: Default Values

    RMU2080 Channel Voice Prompt: DEFAULT VALUES Active Channels: Battery Save: Weather Channel: CHAN FREQ CODE Power Up Audio: 2 – 464.5500 1 – 67.0 Hz Battery level + Channel Channel Selector 8 – 467.9250 1 – 67.0 Hz 5 – 467.8500 1 –...
  • Page 59 RM SERIES NON-DISPLAY RADIO FEATURES Antenna Channel Selector On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill SB1 – Monitor Button Lithium Ion Battery SB2 – Channel Select Applies to RMU2080 / RMV2080...

  • Page 60: Factory Settings Reset

    RM SERIES Factory Settings Reset To reset radio to Factory default On/Off settings, Power up Volume Knob with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies. PTT (Push-to-Talk) Button SB1 –...
  • Page 61 RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2080 / RMV2080...
  • Page 62 RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed . PTT (Push-to-Talk) Button Applies to RMU2080 / RMV2080...
  • Page 63 RM SERIES External VOX hands free To enable voice activated 3) On/Off (VOX) accessories, Volume Knob 1. Use the Customer 2) Attach Programming Software accessory (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
  • Page 64 RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2080 / RMV2080...
  • Page 65 RM SERIES Power up Audio Announcement On/Off To cycle through the Power Volume Knob up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
  • Page 66 RM SERIES Advanced Configuration To enter the On/Off Volume Knob Advanced Configuration menu, power up pressing PTT + SB1 button PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2080 / RMV2080...
  • Page 67 RM SERIES Advanced Configuration Frequency Weather Code CH 1 1) The radio provides voice feedback of the Active Auto Channel Scan mode entered PTT (Push-to-Talk) Button “Programming 2) Press PTT to Mode, cycle through the Channel 1” Advanced Configuration Menu options Applies to RMU2080 / RMV2080...
  • Page 68 RM SERIES Advanced Configuration Frequency Weather Code CH 1 Select from the list of pre-programmed frequencies Active Auto Channel Scan “Frequency x, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2080 / RMV2080...
  • Page 69 RM SERIES Advanced Configuration Frequency Weather Code 1) Press PTT to cycle CH 1 through to the Code Menu 2) Select from the list Active Auto Channel Scan of pre-programmed codes “Code x, To change press SB1 – Monitor Button side button 1 SB2 –...
  • Page 70 RM SERIES Advanced Configuration Frequency Weather Code 1) Press PTT to cycle CH 1 through to the Auto Scan menu 2) Enable / disable by Active Auto Channel Scan pressing SB1 or “Auto Scan Disabled, To change press SB1 – Monitor Button side button 1 or SB2 –...
  • Page 71 RM SERIES Advanced Configuration Frequency 1) Press PTT to cycle Weather Code through to the CH 1 Active Channel menu 2) Add / remove Active Auto Channel Scan channels by pressing SB1 or “Active Channels 2, To change SB1 – Monitor Button press side SB2 –...
  • Page 72 RM SERIES Advanced Configuration Frequency 1) Press PTT to cycle Weather Code through to the CH 1 Active Channel menu Active Auto Channel Scan 2) Enable / disable by pressing SB1 or “Weather Enabled, To change press SB1 – Monitor Button side button 1 or SB2 –...
  • Page 73 RM SERIES Advanced Configuration Frequency 1) Press PTT to cycle through the Advanced Active CH 2 Code Channel Configuration Menu until you hear the channel number Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the...
  • Page 74 RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio. 1) Power button 2) Press and hold PTT until you cycle back to top of programming menu and hear a ‘beep” then press and hold PTT until you hear Power up 2) PTT (Push-to-Talk) Audio...
  • Page 75 RM SERIES BUILT TOUGH TO DO BUSINESS BETTER...
  • Page 76 RMV2080 QUICK REFERENCE GUIDE DEFAULT VALUES MODEL FEATURES FACTORY DEFAULT DISABLE TONES IVOX RMV2080 CHANNEL ANNOUNCEMENT POWER UP AUDIO ADVANCED CONFIGURATION...

  • Page 77: Default Values

    RMV2080 Channel Voice Prompt: DEFAULT VALUES Active Channels: Battery Save: Weather Channel: CHAN FREQ CODE Power Up Audio: 20 – 154.4900 1 – 67.0 Hz Battery level + Channel 21 – 154.5150 1 – 67.0 Hz Channel Selector 1 – 151.6250 1 –...
  • Page 78 RM SERIES NON-DISPLAY RADIO FEATURES Antenna Channel Selector On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill SB1 – Monitor Button Lithium Ion Battery SB2 – Channel Select Applies to RMU2080 / RMV2080...

  • Page 79: Factory Settings Reset

    RM SERIES Factory Settings Reset To reset radio to Factory default On/Off settings, Power up Volume Knob with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies. PTT (Push-to-Talk) Button SB1 –...
  • Page 80 RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2080 / RMV2080...
  • Page 81 RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed . PTT (Push-to-Talk) Button Applies to RMU2080 / RMV2080...
  • Page 82 RM SERIES External VOX hands free To enable voice activated 3) On/Off (VOX) accessories, Volume Knob 1. Use the Customer 2) Attach Programming Software accessory (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
  • Page 83 RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2080 / RMV2080...
  • Page 84 RM SERIES Power up Audio Announcement On/Off To cycle through the Power Volume Knob up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
  • Page 85 RM SERIES Advanced Configuration To enter the On/Off Volume Knob Advanced Configuration menu, power up pressing PTT + SB1 button PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2080 / RMV2080...
  • Page 86 RM SERIES Advanced Configuration Frequency Weather Code CH 1 1) The radio provides voice feedback of the Active Auto Channel Scan mode entered PTT (Push-to-Talk) Button “Programming 2) Press PTT to Mode, cycle through the Channel 1” Advanced Configuration Menu options Applies to RMU2080 / RMV2080...
  • Page 87 RM SERIES Advanced Configuration Frequency Weather Code CH 1 Select from the list of pre-programmed frequencies Active Auto Channel Scan “Frequency x, To change SB1 – Monitor Button press side SB2 – Channel Select button 1 or 2” Applies to RMU2080 / RMV2080...
  • Page 88 RM SERIES Advanced Configuration Frequency Weather Code 1) Press PTT to cycle CH 1 through to the Code Menu 2) Select from the list Active Auto Channel Scan of pre-programmed codes “Code x, To change press SB1 – Monitor Button side button 1 SB2 –...
  • Page 89 RM SERIES Advanced Configuration Frequency Weather Code 1) Press PTT to cycle CH 1 through to the Auto Scan menu 2) Enable / disable by Active Auto Channel Scan pressing SB1 or “Auto Scan Disabled, To change press SB1 – Monitor Button side button 1 or SB2 –...
  • Page 90 RM SERIES Advanced Configuration Frequency 1) Press PTT to cycle Weather Code through to the CH 1 Active Channel menu 2) Add / remove Active Auto Channel Scan channels by pressing SB1 or “Active Channels 2, To change SB1 – Monitor Button press side SB2 –...
  • Page 91 RM SERIES Advanced Configuration Frequency 1) Press PTT to cycle Weather Code through to the CH 1 Active Channel menu Active Auto Channel Scan 2) Enable / disable by pressing SB1 or “Weather Enabled, To change press SB1 – Monitor Button side button 1 or SB2 –...
  • Page 92 RM SERIES Advanced Configuration Frequency 1) Press PTT to cycle through the Advanced Active CH 2 Code Channel Configuration Menu until you hear the channel number Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the...
  • Page 93 RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio. 1) Power button 2) Press and hold PTT until you cycle back to top of programming menu and hear a ‘beep” then press and hold PTT until you hear Power up 2) PTT (Push-to-Talk) Audio...
  • Page 94 RM SERIES BUILT TOUGH TO DO BUSINESS BETTER...
  • Page 95 RMU2080d QUICK REFERENCE GUIDE DEFAULT VALUES MODEL FEATURES FACTORY DEFAULT DISABLE TONES IVOX RMU2080d CHANNEL ANNOUNCEMENT POWER UP AUDIO ADVANCED CONFIGURATION...
  • Page 96 RMU2080d Channel Voice Prompt: DEFAULT VALUES Active Channels: Battery Save: Weather Channel: CHAN FREQ CODE Power Up Audio: 2 – 464.5500 1 – 67.0 Hz Battery level + Channel 8 – 467.9250 1 – 67.0 Hz Channel Selector 5 – 467.8500 1 –...
  • Page 97 RM SERIES DISPLAY RADIO FEATURES Antenna Channel Selector On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill SB1 – Monitor Button Lithium Ion Menu button Use to lock keypad Battery SB2 – Channel Select Front Buttons Use <...
  • Page 98 RM SERIES Factory Settings Reset To reset radio to Factory default On/Off settings, Power up Volume Knob with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies. PTT (Push-to-Talk) Button SB1 –...
  • Page 99 RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select...
  • Page 100 RM SERIES IVOX hands free 1) On/Off 1. To enable the IVOX Volume Knob Power up with PTT pressed . 2. Press the menu button to adjust IVOX Mic Sensitivity 1) PTT (Push-to-Talk) Button IVOX 2) Menu Button...
  • Page 101 RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 2) On/Off 1. Attach a VOX supported Volume Knob accessory 2. Power up with VOX 1) Attach accessory attached accessory 3. Press the menu button to adjust IVOX Mic Sensitivity 3) Menu Button...
  • Page 102 RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button...
  • Page 103 RM SERIES Power up Audio Announcement On/Off To cycle through the Power Volume Knob up Audio Announcement options power the radio while pressing SB1, SB2 at the same time. OPTIONS: 1. Channel # 2. Battery level + Channel # 3. Silent SB1 –...
  • Page 104 RM SERIES Advanced Configuration To enter the On/Off Volume Knob Advanced Configuration menu, power up pressing PTT + SB1 button PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2080d...
  • Page 105 RM SERIES Advanced Configuration Freque Weath Code Auto Scram Scan CH 1 1) The display blinks and an icon PROG Active Chann Sens appears to denote Radio programming mode Call Tone Sens PTT (Push-to-Talk) “Channel X” Button 2) Press PTT to cycle through the CHAN 01 Advanced...
  • Page 106 RM SERIES Advanced Configuration Freque Weath Code Auto Scram Scan CH 1 Use <A or B> to select from the list of Active Chann Sens pre-programmed Radio frequencies Call Tone Sens 01 RX 02 < A – Decrease CHAN PROG FREQ B >...
  • Page 107 RM SERIES Advanced Configuration Freque Weath Code Auto Scram 1) Press PTT to cycle Scan CH 1 through to the Code Menu Active Chann Sens 2) Select from the list Radio Call Tone of pre-programmed Sens codes 01 RX 001 <...
  • Page 108 RM SERIES Advanced Configuration Freque Weath Code 1) Press PTT to cycle Auto Scram Scan through to the CH 1 Scramble menu Active Chann Sens 2) Select 0 to disable Radio or assign a Call Tone Sens scramble code from 1 - 4 <...
  • Page 109 RM SERIES Advanced Configuration Freque Weath Code 1) Press PTT to cycle Auto Scram Scan through to the CH 1 Active Channel menu Active Chann Sens Radio 2) Add / remove Call Tone Sens channels by pressing <A or B> MAXCH 08 <...
  • Page 110 RM SERIES Advanced Configuration Freque Weath Code Auto Scram 1) Press PTT to cycle Scan CH 1 through to the Call Tone menu Active Chann Sens 2) Select 0 to disable Radio Call Tone or assign a Call Sens tone from 1 - 3 TONE <...
  • Page 111 RM SERIES Advanced Configuration Freque Weath Code 1) Press PTT to cycle through to the Auto Scram Scan Radio Internal CH 1 Microphone sensitivity menu Active Chann Sens Radio 2) Default value is Call Tone Sens Medium (2) you can select Low (1) or High (3) by pressing <A or B>...
  • Page 112 RM SERIES Advanced Configuration Freque Weath Code 1) Press PTT to cycle through to the Auto Scram Scan CH 1 Accessory Microphone Active sensitivity menu Chann Sens Radio Call 2) Default value is Tone Sens Medium (2) you can select Low (1) or High (3) by pressing <A or B>...
  • Page 113 RM SERIES Advanced Configuration Freque Weath Code Auto Scram Scan 1) Press PTT to cycle CH 1 through to the Auto Scan menu Active Chann Sens Radio 2) Press <A or B> to Call Tone Sens enable / disable < A – Decrease CHAN PROG B >...
  • Page 114 RM SERIES Advanced Configuration Freque Weath Code 1) Press PTT to cycle through to the Weather menu. Auto Scram Scan Channel 8 comes factory CH 1 programmed as the Weather Channel Active Chann Sens Radio 2) Any channel can be Call Tone Sens...
  • Page 115 RM SERIES Advanced Configuration Freque Weath Code Auto Scram Scan CH 2 1) After you finish configuring the current Channel Selector Active channel you can select Chann Sens another channel to Radio Call configure by using the Tone Sens Channel selector PTT (Push-to-Talk) Button 2) Press PTT to...
  • Page 116 RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio. 1) Power button 2) Press and hold PTT until you cycle back to top of programming menu and hear a ‘beep” then press and hold PTT until you hear Power up 2) PTT (Push-to-Talk) Audio...
  • Page 117 RM SERIES BUILT TOUGH TO DO BUSINESS BETTER w w w . t w o w a y r a d i o c e n t e r . c o m 1 - 8 5 5 - 3 5 4 - 6 6 6 0...

This manual is also suitable for:

Rmu2043Rmm2050

Table of Contents