Editing Print Data And Printing - Hitachi PB Series User Manual

3. Editing Print Data and
The contents can be
edited when the
Status is either
"Stop", "Standby" or
"Ready".
Section 3
Printing
Overview
The content to be printed is entered in the "Print description" screen.
Select the [Print format], [Edit message] or [Print spec.] screen from the menu and
set the contents to be printed.
The print image can be checked in the print layout area after you have made the
entries.
When the system is started, the screen shows the data printed the last time the
system was used.
Typical print description screen at system startup:
The print description may comprise up to 80 characters.
The line number can be set up using no more than two.
Number of lines
1
2
Select the [Print format], [Edit message], and [Print spec.] screens from the menu
and set them step by step.
Number of characters
80 x 1 line
40 x 2 lines
3–1