Operating Procedure - Hitachi PB Series User Manual

3–22 3.4 Setting Repeat Print
3.4.2

Operating procedure

Setting the repeat intervals and repeat count.
1. Press [Print spec.] on the Printing description screen.
The "Print specifications" display will appear.
2. Press [Next display].
The second page of "Print specifications" screen will appear.
3. Set the repeat intervals.
The unit of repeat intervals can be changed by pressing
[Character unit CH] or [Scanning unit SC].
[Character unit CH] is used to select the character width unit and
[Scanning unit SC] is used to set the interval in dot width.
4. Press [0] [3] [0] [0] for [Scanning unit SC].
A repeat print intervals setting of 300 is selected.
5. Touch the line to set repeat count.
The cursor moves to the repeat count input field.
6. Press [9] four times successively.
The repeat count is set to 9999.
7. Press [Apply].
8. Press [Back].
You are then returned to the "Printing description" screen.
Section 3